This Morning Bliss Coffee Pod Holder laser cutter design is 6.375" wide and 9.75" tall. It holds 9 coffee pods or K-Pods and sits on the counter for easy access.
Though the feet on the design slide on easily, you will need some craft glue or wood glue to secure them to the base.
This laser cutter K-Pod stand design comes in DXF, EPS, PDF, and SVG files to work with whatever equipment and software you have. If you need another file format, please reach out to me and I'll be happy to create that for you.
Files are available for 1/8", 1/4", 3mm, 4mm, 5mm, and 6mm material thicknesses. The files are ready to use with all major laser cutters.
This stand can be cut from plywood, MDF, hardboard, or acrylic. Make sure to measure your material with digital calipers in several locations to be sure it is uniform in width. MDF and acrylic are usually uniform all over, but plywood isn't always and could affect how the basket pieces fit together.
I recommend painting wood materials with watercolor paints or stains to retain the wood grain look and not add any depth to the pieces. The pieces are designed to fit tightly together, so if you use a thicker paint, you will want to widen the holes to accommodate the extra width. I always glue the pieces together first before painting (with spray paint most often) to make sure everything fits nicely and has an even coat.
Requirements:
• Files come in zip format. Typically files will open automatically or by double clicking on them. If not, you may need to get an unzipping program like Winzip or 7-Zip.
• You will need the appropriate software to open these files. This may include Adobe Illustrator, Inkscape, LightBurn or similar software.
Please remember:
• Before purchasing and downloading, be sure you know how to work with these file types.
Thank you for visiting my shop!
All your Font Needs
