** MATERIALS **
SVG, AI, EPS, DXF, PDF
** WHAT IS INCLUDED? **
3 x Pirate Shadow box 3D paper layer designs in EPS, PDF, SVG, DXF and AI format all in a seperate zip file.
3 x Mermaid Shadow box 3D paper layer designs in EPS, PDF, SVG, DXF and AI format all in a seperate zip file
1 x Cardsock / paper Shadow box template SVG file for laser cutting / glowforge, Cricut and silhouette machines.
!! This is a cut file for cardstock / paper (220 gsm - 350 gsm)
Box size: 203mm x 203mm x70mm deep. (8 3/16" x 8 3/16" x 2 3/4" deep)
Space for up to 9 paper layers with 5mm spacers.
3D paper layer artwork size for this box is 200mm x 200mm (7 7/8" x 7 7/8")
Files cater for most of the laser cutting / Glowforge, Cricut and Silhouette machines.
List of materials needed.
Assembly diagram.
Assembly Instructions.
** WHAT IS NOT INCLUDED? **
LED lights.
Tools to assemble the artwork.
We do sell a very handy 3D wooden frame laser cut template with spacers:
** HOW DOES IT WORK?**
This is a digital product no physical product will be sent.
Once payment is complete, digital files will be available for download in your account.
Digital file download instructions -
** HOW DO I USE THESE FILES? **
1. Unzip the files in your format of choice.
2. These files are then ready to use with all major laser and cutters, Glowforge lasers, Cricut and Silhouette machines.
3. The design is scalable but it work best in its original format and size. Rather go bigger than smaller.
4. Cut the design and assemble according to the provided diagram.
5. For best results use 160gsm - 250gsm paper / card stock. Best to use white, but you can use different colors to enhance the artwork.
6. You will then need the following to complete your 3d shadow / light box:
- Craft knife and scissors.
- Foam board for spacers. (Cut 1cm or 0,394" wide).
- Shadow box frame, depth at least 6-8cm
- RGB LED strip with power supply.
- Double sided tape.
** IMPORTANT **
1. You don't need to cut the numbers on the bottom left corner of the artwork. It is there for reference and to ensure you cut all the layers and assemble it in the correct order.
2. Make sure that your printer settings are set to print at actual size or 100%.
3. We ONLY sell digital files (e.g. SVG, PNG, EPS and DXF files). We are are not experts on cutting machines or any printers. Please do not contact us for any issues relating to any cutting machines and/or printers that you own.
All your Font Needs
