More information on this Design
This is an IN THE HOOP / MACHINE EMBROIDERY DESIGN.
You must also have an embroidery machine and software, and know how to use it in order to use this file. You will also need to be able open a zipped folder.
I give you step by step instructions to complete the project. This key fob has a little pocket just big enough for you to slip a folded piece of paper with important information and phone numbers.
?
?This is a 4 x 4 inch hoop friendly project!
Size of embroidery
3.48 x 3.46 inches
Size of finished project
2 1/8 x 3 1/8 inches (when snap is closed and not including the metal attachment)
??Please Note:
40 wt, 100% polyester thread (top thread) was used on all my samples. I also used 1 layer of tear-away stabilizer, vinyl for the backing, and vinyl for the main fabric. You will also need one set of snaps such as KAM Snaps. To finish, you'll need a key ring or swivel hook.
All of my patterns have been tested and retested, and they stitched out perfectly. If you have any problems with the stitch out, please contact me and I will try my best to help you. I do not recommend changing the size or stitch count of these files because they will alter the final results. I give you the color chart so you will know what order objects are stitched in, but of course, you will use the colors of your choice!
Formats are as follows:
JEF, PES, HUS, EXP, PCS, DST, VIP, VP3, XXX
You will receive 1 zip file containing each of the above formats, my terms (which can also be seen here), and a PDF file with important information and pattern instructions.
Suggested Product Collections
All your Font Needs
