This Fairy Kettle House laser cut design was born from a playful thought — what if a forgotten teapot in the woods became a fairy’s cozy home? I imagined moss growing on its sides, a tiny chimney puffing out steam, and warm light glowing from within. That idea turned into this cut file: a whimsical kettle-shaped cottage with a removable roof. You can open it and place a small light, gift, or secret note inside — making it not just decorative, but a little magical too.
🤏Material thickness (versions of the files): 3 mm, 1/8'' (3.175 mm), 4 mm, 5 mm, 6 mm, 1/4'' (6.35 mm)
Level of assembly difficulty: ⚫⚫⚫⚪⚪
⚠️ Contains small parts
⚠️ Some parts are glued
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
📏 Finished SIZE
3 mm thickness: 75 x 110 x 80 mm (2,95 x 4,33 x 3,15'')
1/8''(3.175mm) thickness: 79 x 116 x 85 mm (3,13 x 4,58 x 3,33'')
4 mm thickness: 100 x 147 x 107 mm (3,94 x 5,77 x 4,20'')
5 mm thickness: 125 x 183 x 133 mm (4,92 x 7,22 x 5,25'')
6 mm thickness: 150 x 220 x 160 mm (5,91 x 8,66 x 6,30'')
1/4''(6.35mm) thickness: 159 x 233 x 169 mm (6,25 x 9,17 x 6,67'')
📐WORK AREA - total area of wood required for cutting
3 mm thickness: 275 x 238 mm (10,83 x 9,37'')
1/8''(3.175mm) thickness: 291 x 252 mm (11,46 x 9,92'')
4 mm thickness: 367 x 317 mm (14,44 x 12,49'')
5 mm thickness: 485 x 420 mm (19,10 x 16,53'')
6 mm thickness: 550 x 476 mm (21,65 x 18,74'')
1/4''(6.35mm) thickness: 582 x 504 mm (22,92 x 19,83'')
🟧 LARGEST PART
3 mm thickness: 66 x 66 mm (2,60 x 2,60'')
1/8''(3.175mm) thickness: 70 x 70 mm (2,75 x 2,75'')
4 mm thickness: 88 x 88 mm (3,46 x 3,46'')
5 mm thickness: 116 x 116 mm (4,58 x 4,58'')
6 mm thickness: 132 x 132 mm (5,20 x 5,20'')
1/4''(6.35mm) thickness: 140 x 140 mm (5,50 x 5,50'')
⚠️ If you are using wood whose thickness is not included in the design, you can easily scale the file.
1) Import a file that is thicker than the thickness of your wood.
2) Multiply the width and length of the file by your actual thickness and divide by the thickness of the wood in the file.
For example, your wood is 4.5 mm thick.
Import the file for 5 mm. Multiply the width and length of the imported file by 4.5 and divide by 5.
This will give you a 4.5 mm file.
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
🛒WHAT YOU RECEIVE
🟢 ready made laser cutting files for 3mm, 1/8''(3.175mm), 4mm, 5 mm, 6 mm, 1/4'' (6.35 mm) material thickness
🟢 detailed PDF-instructions with 3D pictures
🟢 each file is saved in SVG, DXF, CDR, AI formats
🟢 free support consultations and small adjustments
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
📧Feel free to contact me if you have any questions
😊 I always happy to help you
All your Font Needs
