Business Center, Business Card Holder - QR Codes with NFC Option. Customize with your business name and QR codes. I put a NFC chip below the first layer and in the center. (Between both bottom pieces)
Great for market stalls, shop displays, craft displays. Digital File – SVG, DXF – Laser Cut Files – Glowforge - XTool.
I also added the Lightburn file so you don't have to do anything but change the speed and power for your machine!
Apprx. 10 Inches wide and 3.5 Inches tall.
------------
Material Thickness Files Include:
3mm
Dimensions:
254mm Wide
106mm Deep
90mm Tall
File Types Included:
All design formats are included in a single ZIP file.
SVG, DXF, lbrn2
------------------
Materials Used and Warnings:
I use regular 1/8th inch basswood i get on Amazon. Don't forget to make some sample cuts and test. I’ve included a Free Tester Guide for you to test your material size to you can adjust accordingly. Additionally, you can use any wood you like, just test before you cut them all.
------------------
*FREE Slot Tester File Included - As with any materials, every batch can and does vary, so be sure to measure the thickness of your materials and cut small tests before doing the whole project as you may need to adjust your slots.
PERMISSIONS FOR USE:
These digital files are owned by 302 Custom Designs and should not be resold in any digital format.
Thank You for Looking!
If you have any questions, I’ll be happy to help You.
All your Font Needs
