Let It Snow Glowforge SVG | Christmas Snowman Round

Let It Snow Glowforge SVG | Christmas Snowman Round Laser Cut File

Based on my best selling cut file! This Glowforge-ready file is made specifically for laser users.

Looking for the cut file for your cutting machine? Click here! https://designbundles.net/diva-watts-designs/1582037-let-it-snow-svg-christmas-snowman-design

The design can be cut using only 1 sheet of material. I used 1/8" birch plywood.

I applied 3M to ½ of the back of one side of the wood so the snowman, snowflakes and words can be easily applied to the round.

You will cut all pieces except though the snowman design inside the round (this will be scored, which is optional but helps with placement).

After cutting my design (for approximately 9.4 in diameter) it took me around 12 minutes with my Glowforge pro.

Once cut I removed the masking. I stained the round and painted the other pieces the colors of my choice. Allow to dry completely before gluing. Preferably overnight due to the stain. It may prevent glue from adhering.

Once dry, I then remove the 3m tape from the elements and applied to my circle.

Voila! You are done!

Please Note: You can use glue instead of 3M. I just find 3M to be faster and easier.

*Another note: If wanting to cut as an ornament I would use caution as some elements can be more difficult to cut at a smaller size (such as the round "snow" and words).

**If you want to cut larger than the size stated you may do so but you will need to have a larger laser bed or a passthrough slot to make a larger circle. Alternatively you may purchase a pre-cut circle and size your ghost/words layer to the size of your circle.

Files Included:

SVG

AI

PDF

©Diva Watts Designs, LLC 2022 - Beyond

Photos depicting finished products are examples of what you can make when using the design.