Let It Snow Winter Glowforge SVG | Christmas Snowman Round

Let It Snow Glowforge SVG | Winter Snowman Laser File

This design is based on my best selling cut file design. Adapted to work perfectly with your Glowforge!

The design can be cut using only 1 sheet of material.

I applied 3M to ½ of the back of one side of the wood so the snowman, snowflakes and words can be easily applied to the round.

You will cut all pieces except though the snowman design inside the round (this will be scored, which is optional but helps with placement).

After cutting my design (for approximately 10.5 in diameter) it took me around 10 minutes with my Glowforge pro.

Once cut I removed the masking. I stained the round and painted the other pieces the colors of my choice. Allow to dry completely before gluing. Preferably overnight due to the stain. It may prevent glue from adhering.

Once dry, I then remove the 3m tape from the elements and applied to my circle.

Voila! You are done!

Please Note: You can use glue instead of 3M. I just find 3M to be faster and easier.

©Diva Watts Designs, LLC 2022 - Beyond

Included File Types:

SVG

PDF

AI

Photos depicting finished products are examples of what you can make when using the design.