Christmas Deer Lamp SVG - Forest Scene Laser Cut Files

Create a Christmas lamp with an antlered deer and a fawn in front of three fir trees. Five star-shaped cutouts decorate the central tree, with a connected solid star above it. Both deer have four connected legs; the fawn has three small spot cutouts. The rear scene is one flat sheet with continuous ground and no dividing line. The scene uses two cutout panels separated by flexible perimeter walls, with room for optional low-voltage LED lighting inside the rim. A rounded rectangular box base supports the lamp on a shelf, mantel or console.

The download contains the complete seven-part design: two decorative panels, two flexible hexagonal wall strips, a base top, a base bottom and a flexible base wall. All artwork is cut through; there is no engraving. The original living-hinge cuts and tab-and-slot construction are retained.

Supplied formats: SVG, vector PDF and EPS. You receive a combined 400 x 340 mm cutting layout, a corresponding Glowforge-layout SVG, seven individual part SVGs, an English README and a two-page English assembly guide. Choose the combined layout or the individual parts to avoid cutting duplicate sets.

Each decorative panel measures approximately 180 x 164.76 mm including its bottom tab. The nominal assembled envelope is approximately 180 x 198 x 66 mm, derived from the source geometry. With nominal 3 mm sheet material, the hexagonal body is about 18 mm deep, leaving a 12 mm clear gap between the two panels.

Use laser-compatible 3 mm stock that is suitable for living hinges, such as a tested MDF or plywood grade. Check actual thickness, kerf and bending on a sample first. Scaling changes the joint sizes; other thicknesses or sizes require fit checks and possible joint adjustments. Material, LEDs and electronics are not included.

Digital files only; this is not a finished lamp. The images are illustrative product visualizations. No physical test build has been performed.