Woodland Birds Christmas Lamp SVG - Laser Cut Files

Create a cozy winter woodland lamp with two birds perched on a fallen log. The light front panel combines bullfinches, a rowan berry sprig, a low snowbank and hanging fir boughs. The open centre reveals a separate honey-coloured rear panel: a stag with branching antlers and four legs, standing among sparse conifers. Smooth decorative contacts join the artwork naturally to the original hexagonal frame. Both decorative sheets are cut from a single material colour, with no engraving or extra relief layers. The two panels are separated by flexible perimeter walls, with room for optional low-voltage LED lighting inside the rim. A rounded rectangular box base supports the lamp on a shelf, mantel or console.

The download contains the complete seven-part design: two decorative panels, two flexible hexagonal wall strips, a base top, a base bottom and a flexible base wall. All artwork is cut through; there is no engraving. The original living-hinge cuts and tab-and-slot construction are retained.

Supplied formats: SVG, vector PDF and EPS. You receive a combined 400 x 340 mm cutting layout, a corresponding Glowforge-layout SVG, seven individual part SVGs, an English README and a two-page English assembly guide. Choose the combined layout or the individual parts to avoid cutting duplicate sets.

Each decorative panel measures approximately 180 x 164.76 mm including its bottom tab. The nominal assembled envelope is approximately 180 x 198 x 66 mm, derived from the source geometry. With nominal 3 mm sheet material, the hexagonal body is about 18 mm deep, leaving a 12 mm clear gap between the two panels.

Use laser-compatible 3 mm stock that is suitable for living hinges, such as a tested MDF or plywood grade. Check actual thickness, kerf and bending on a sample first. Scaling changes the joint sizes; other thicknesses or sizes require fit checks and possible joint adjustments. Material, LEDs and electronics are not included.

Digital files only; this is not a finished lamp. The images are illustrative product visualizations. No physical test build has been performed.