This is not just a miniature mill. It is actually a piggy bank. You just have to throw a coin into the hole on the roof and turn the screw to make the coin fall down. The bottom of the mill can easily be removed so you don't have to take the whole mill apart to get the money
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
🤏Material thickness (versions of the files):
3mm, 1/8''(3.175mm), 4mm, 6mm, 1/4''(6.35mm)
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
📏 Finished SIZE of design
3 mm thickness: 170 x 117 x 260 mm (6,69 x 4,61 x 10,24'')
1/8''(3.175mm) thickness: 180 x 124 x 275 mm (7,08 x 4,88 x 10,83'')
4 mm thickness: 227 x 156 x 347 mm (8,92 x 6,14 x 13,65'')
6 mm thickness: 340 x 234 x 520 mm (13,39 x 9,21 x 20,47'')
1/4''(6.35mm) thickness: 360 x 248 x 550 mm (14,17 x 9,75 x 21,67'')
📐WORK AREA - total area of wood required for cutting
3 mm thickness: 792 x 387 mm (31,18 x 15,24'')
1/8''(3.175mm) thickness: 838 x 410 mm (33,00 x 16,13'')
4 mm thickness: 1056 x 516 mm (41,57 x 20,31'')
6 mm thickness: 1584 x 774 mm (62,36 x 30,47'')
1/4''(6.35mm) thickness: 1676 x 819 mm (66,00 x 32,25'')
🟧 LARGEST PART
3 mm thickness: 325 x 325 mm (12,80 x 12,80'')
1/8''(3.175mm) thickness: 344 x 344 mm (13,54 x 13,54'')
4 mm thickness: 433 x 433 mm (17,06 x 17,06'')
6 mm thickness: 650 x 650 mm (25,59 x 25,59'')
1/4''(6.35mm) thickness: 688 x 688 mm (27,08 x 27,08'')
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
🛒WHAT YOU RECEIVE
🟢 ready made laser cutting files for 3mm, 1/8''(3.175mm), 4mm, 6 mm, 1/4'' (6.35 mm) material thickness
🟢 each file is saved in SVG, DXF, CDR, AI formats
🟢 detailed PDF-instructions with 3D pictures
🟢 free support consultations and small adjustments
▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪
📧Feel free to contact me if you have any questions
😊 I always happy to help you