- Display your postcards or greeting cards at a craft show or craft fair with this fancy 12-compartment 4-tier display case.
With our DXF cutting files, Glowforge project, and SVG cut files, you'll have everything.
You can use it with or without "lazy susan". The project does not have markings for attaching "lazy susan" to the bottom part.
PLEASE NOTE - No physical item will be sent.
Dimentions:
L 368mm / 14.5"
W 368mm / 14.5"
H 742mm / 29.2"
Compartment size:
L 145mm / 5.7"
W 40mm / 1.6"
H 105mm / 4.1"
Material thickness 6mm / .236".
PLEASE use an electronic vernier caliper to check the thickness of your material before purchasing.
If the parameters differ by 2-3 tenths of a millimeter or an inch, you will not be able to get a quality product.
The model is assembled with glue.
You will receive two archives.
The "Display" archive will contain files with a general view of the design. You will be able to organize the order of cutting yourself.
The second archive "Display 60x90" contains files where parts are grouped for cutting on a machine with a working area of 60x90cm. You will need 3 sheets of material.
You can see the general view of the file in the last photo.
- Stand / display for stickers.
Can be used with the lazy susan device.
You can add a divider to the shelves, or use the entire length of the shelf. If you do not need partitions, remove these parts before cutting.
Material thickness:
3mm wood for the base and 3mm wood or acrylic for shelf railing - .118" wood for the base and .118" wood or acrylic for shelf railing;
5.3mm wood for the base and 3mm wood or acrylic for shelf railing - .208" wood for the base and .118" wood or acrylic for shelf railing.
- After payment, you will receive an archive with vector files in DXF, AI, SVG, CDR, and PDF formats.
Have questions about licensing or need help unzipping the product file?
Please read the instructions for these and many more by checking the help center, by following the link below:
https://designbundles.net/help-center
Take your time, be careful, if there are difficulties - write to me.
Have a nice work!
All your Font Needs
