- By Design Bundles
- 25 Oct 2019
- 2 Mins
- Scan N Cut Tutorials
Foiling on vellum in brother scan and cut machine using the foil quill
2- Write your text (or place the design you want to use).
3- Change your font to your needs. I am using the font Anything Goes created by Denise Chandler.
4- Once you are happy, go to file- transfer FCM to file via the internet. If you do not have a wireless model, transfer to USB.
5- You may get a warning pop up window if the file parts are very small. click OK.
6- A new window will pop up to let you know it has transferred.
7- Turn on your machine and click the pattern icon.
8- Click on the transfer icon.
9- your design will appear on your screen. Click OK.
10- Check to see it is within the foil covered section of your vellum. click OK.
11- Click Draw. If your design is too small, use the cut function instead. You will need to adjust the cut settings for the foil quill.
12- For vellum I use a speed of 1 and pressure of 0.
13- This will give you a good foil on vellum and a slight emboss effect.
6 Related Scan N Cut Tutorials
*CM900 model used.1- Place your ribbon on your cutting mat. make sure it is secured well and is perfectly flat.2- On your machines screen select pattern.3- At this point you can import a design from canvas workspace or choose a preset design. I will use a preset ...
CM900 model used.1- Open scan n cut canvas workspace. Select the shape tools. (or upload your own design)2- Add your design to the workspace.3- With the design selected, go to properties and in the drop down box select draw.4- Go to file- Transfer FCM via the ...
*CM900 model used.1- Open canvas workspace. Click on the text icon.2- With the text selected click on the edit panel.3- Click on the offset icon. new window will pop up. This will enable you to place an internal or external offset in your text. You can adjust ...
*CM900 model used.1- Open scan and cut canvas workspace.2- Click on the shapes icon and select a square.3- Resize to make a rectangle.4- Select a border. You can also import a SVG to use as a border.5- Resize the border and place over the rectangle.6...
*CM900 model used. 1- Open canvas workspace. click on the shape tool.2- Click and create a circle. This will be the outside of your sticker which will cut.3- Find a design to place inside your sticker that you can foil. I have used a pre designed one form ...
*CM900 used.1-Open the front of your Brother scan and cut machine. Lift the tab at the front of the blade holder.2- Carefully remove the blade and casing.3- Screw on the B adapter to the foil quill. Plug into a USB power bank. The light should come on ...