Using the foil quill on ribbon with Brother scan and cut machine Posted on 1st November 2019 *CM900 model used. 1- Place your ribbon on your cutting mat. make sure it is secured well and is perfectly flat. 2- On your machines screen select pattern. 3- At this point you can import a design from canvas workspace or choose a preset design. I will use a preset design today. 4- Select your design. 5- Click on set if you are happy with the size. 6- You can also fill your design at this point by clicking the fill icon. (note you have 5 different fill designs that can be changed in settings before you foil your design.) 7- Scan your mat and then with the media clear on the screen position your design over the ribbon. Click OK. 8- Click draw. You can here also click settings and change the fill type. For ribbon i use the setting speed 2 and pressure 1 9- Place the foil over the ribbon and secure. then click the start icon and your quill will start to foil the ribbon. 10 - Your design is now on your ribbon. You can also place a longer piece on your mat and foil vertical so you can do lengths longer than the mat.